Analysis Of Moral Education

Arduino

ELECTRICAL ENGINEERING TECH. (EE 306) Arduino Research Date: 2013/2/16 INTRODUCTION In this concise report we will talk about a group of electronic sheets called Arduino. Toward the starting we will give a review of the Arduino sheets and what they are. After that we will handle the board’s part and how the board functions. At long last a case of one of the applications will be appeared. WHAT IS AN ARDUINO? An Arduino board is just a microcontroller board. The board is structured to encourage the utilization of gadgets in ventures. The utilization of the board was deliberately made simple so anybody can utilize it.The board accompanies a product called the Arduino Integrated Development Environment. The product is utilized to program the Arduino board to do the necessary tasks. An Arduino board gets contributions from various sensors and reacts by controlling various kinds of actuators. It is additionally worth-referencing that the board and its product are open-source. It imp lies that anybody can do anything with the board and its product. This nature has made the Arduino sheets exceptionally mainstream among clients since everybody can enhance with the board and offer their innovations.However, this nature has additionally permitted clones with second rate characteristics to be sold under the Arduino name. Parts There are numerous kinds of Arduino sheets. A few parts shift from type to type, yet a basic Arduino board that can be worked at home have the accompanying segments: 1-An Atmel Microcontroller. 2-LEDs. 3-Resistors. 4-Capacitors. 5-Clock Crystal. 6-Switch 7-Voltage controller. 8-Connection pins. 9-Diode. 10-Transistors. An Arduino board’s capacities can be stretched out by the utilization of shields. Arduino shields are sheets that can be mounted on the Arduino board to perform diverse tasks.For model the Xbee shield permits numerous Arduino sheets to convey remotely, the engine shield permits the Arduino board to control a DC engine. 2|P a ge HOW IT WORKS when all is said in done, a code is placed in the memory of the board and afterward prepared in the microcontroller. This code interfaces with sources of info and yields. Data sources can be signals originating from sensors (light, voice, heat, and so on ) or results from another prepared undertaking. In the wake of preparing the contributions to the microcontroller and applying the codes from the memory, the outcome arrives in a yield structure (caution, light, and so on. ).Codes are written in the memory by interfacing the Arduino board to a PC. Interfacing the Arduino board requires the utilization of an ICSP header or a USB link, for example, the one found in the more up to date forms e. g. Arduino UNO (see figure 1). An Arduino board can be fueled from a USB link, an ACDC connector or a battery by associating it in the Gnd and Vin pins. Figure 1: Connect Arduino by USB EXAMPLE OF APPLICATION Blinking LED In this model, we will utilize the Arduino load up like a clock to turn a LED on for 1 second and off for one more second. 3|P a ge To do this capacity see the code beneath;/Example Blinking LED const int LED = 13; void arrangement () { pinMode(LED, OUTPUT); } void circle() { digitalWrite(LED, HIGH); delay(1000); digitalWrite(LED, LOW); delay(1000); } The First line composed after/is a remark that doesn't influence the program. In the subsequent line, we characterize the consistent connected to stick 13 as LED. In the wake of joining the LED to the pin, we choose whether the LED ought to be an information or a yield, for this situation, we picked yield. Next, we compose the handling code, (digitalWrite(LED, HIGH);) this way to give voltage to the LED, (delay(1000);) implies holding up 1000ms ? s, (digitalWrite(LED, LOW);) implies removing the voltage, (delay(1000);) a similar procedure, which is holding up 1s. This code will be rehashed in a circle. End An Arduino board can be an extraordinary beginning stage for anybody keen on microco ntrollers. The board is anything but difficult to utilize and has a wide assortment of utilizations. There are numerous instructional exercises accessible on the planet web for the load up because of its ubiquity. Despite the fact that the board has numerous focal points, it despite everything has its own restrictions. REFERENCE [1] Arduino site, (http://arduino. cc/en/) [2] Simply Arduino, Eng. Abdullah Ali Abdullah, (http://simplyarduino. com/? page_id=5) 4|P a ge

Abilene

Abilene Abilene ab ´ilen [key]. 1 City (1990 pop. 6,242), seat of Dickinson co., central Kans., on the Smoky Hill River; inc. 1869. It was (1867â€"71) a railhead for a large cattle-raising region extending SW into Texas. Millions of cattle followed the Chisholm Trail into the cow town's stockyards prior to shipment. Wild Bill Hickok was Abilene's marshal for a time. The city, a still shipping point for a wheat and cattle region, has feed and flour mills. Abilene was the boyhood home of President Dwight D. Eisenhower ; the Eisenhower Center includes his old family homestead, a museum, the Eisenhower Library, and his grave. 2 City (1990 pop. 106,654), seat of Taylor co., W central Tex.; inc. 1882. Buffalo hunters first settled there; the town, which was founded in 1881 with the coming of the railroad, was named after Abilene, Kans. Abilene grew as a shipping point for cattle ranches and has become the financial, commercial, and educational center of a large part of W Texas. The cit y's diversified manufactures include electronic, aircraft, and missile components; oil-field and agricultural equipment; food and dairy products; clothing; metals; and musical instruments. Livestock (cattle, sheep, and poultry); agriculture (cotton, wheat, sorghum, and hay); and minerals (oil, natural gas, caliche, sand, gravel, and clays) are important to the area's economy. Regional petroleum industry headquarters are in Abilene, and Hardin-Simmons Univ., Abilene Christian Univ., and McMurry College are there. The Columbia Electronic Encyclopedia, 6th ed. Copyright © 2012, Columbia University Press. All rights reserved. See more Encyclopedia articles on: U.S. Political Geography

Corporate Social Responsibility Now and Then Essay

With the recent corporate scandals involving such companies as Enron and Martha Stewart, the concept of corporate social responsibility (CSR) has once again made its way to the forefront of contemporary management ideologies. However, CSR itself is not a new concept. In fact, societies as far back as the Ancient Mesopotamians (circa 1700 BC) incorporated CSR in their businesses. â€Å"King Hammurabi introduced a code in which builders, innkeepers or farmers were put to death if their negligence caused the deaths of others, or major inconvenience to local citizens.† With each new â€Å"Enron† managers of similar corporations are suddenly placed in the spotlight, causing plans to be put into action to create a more socially responsible company. Look†¦show more content†¦Not only do companies create entire reports on the topic of CSR in their organization for their annual reports, these reports have taken the form of sections on their corporate web-sites. Any majo r corporation worth its salt has a web-site, which is available at the touch of a button for anyone to see. Milton Hershey did not have a web-site; he did not have the internet. Milton Hershey and corporations of his time were intrinsically motivated to implement CSR into their businesses because it was the right thing to do. nbsp;nbsp;nbsp;nbsp;nbsp;One point to make is that while corporations of the past were sincere about being socially responsible, it can not be said that all of them, or even most of them practiced CSR. In fact, more corporations today have worked CSR into their businesses. Mostly any large corporation has picked up on the ideas of CSR and realized that most consumers tend to frown upon companies that are not socially responsible and choose instead to purchase goods from companies with a more CSR-minded business structure. But are these CSR practices just sugarcoating these corporations? Enron, before their recent scandal caused by CEO Kenneth Lay, was at the forefront of CSR. This makes one wonder, could it all be a window dressing? How could a corporation such as Enron, which placed such emphasis on being socially responsible to its community (which involved its shareholders and employees),Show MoreRelatedCorporate Social Responsibility: Now and Then1537 Words   |  7 PagesWith t he recent corporate scandals involving such companies as Enron and Martha Stewart, the concept of corporate social responsibility (CSR) has once again made its way to the forefront of contemporary management ideologies. However, CSR itself is not a new concept. In fact, societies as far back as the Ancient Mesopotamians (circa 1700 BC) incorporated CSR in their businesses. King Hammurabi introduced a code in which builders, innkeepers or farmers were put to death if their negligence causedRead Moreâ€Å"Why Companies Can No Longer Afford to Ignore Their Social Responsibilities†1388 Words   |  6 PagesAfford to Ignore Their Social Responsibilities† Theme of the Article Over the years, the perspective of corporate social responsibility has evolved in Corporate America. Today, many businesses have made promises to contribute to current social problems, such as the environment and labor standards. Companies are now looking at corporate social responsibility as a sustainability tactic that can benefit their overall market value. Companies that do not pay attention to their social and ethical responsibilitiesRead MoreCorporate Social Responsibility ( Csr )1167 Words   |  5 PagesCorporate Social Responsibility Introduction Corporate social responsibility (CSR) is a concept which is also known as corporate citizenship, corporate conscience or in a simple way a responsible business. It is an integrated concept of self-regulatory business model for any organisation. Corporate Social Responsibility has been in practice for more than fifty years now, which has been adopted not only by domestic companies but also by transnational company with voluntary CSR initiativesRead MoreCorporate Social Responsibility Of India Essay1669 Words   |  7 Pages CORPORATE SOCIAL RESPONSIBILITY IN INDIA â€Å"Crossing the Bridge from Knowing to doing† Jasleen Kaur Luthra* â€Å"Successful people have a social responsibility to make the world a better place and not just take from it.† Carie Underwood Abstract The 21st century is characterized by unprecedented challenges and opportunities, arising from globalization, the desire forRead MoreCorporate Social Responsibility And Corporate Sustainability Essay1658 Words   |  7 PagesCorporate Social Responsibility Vs Corporate Sustainability in India: A case study on Aditya Birla Group Supriya Agarwal Abstract: Corporate Social Responsibility (CSR) is now a burning topic in India, which became prominent and most amplified in 2013 when companies were obligated to spend two percent of profit after tax in CSR activities set by the Ministry of Corporate Affairs, Government of India. Although, the concept of CSR is not new in India and has evolved and developed very well from hundredsRead MoreCorporate Social Responsibility ( Csr )1167 Words   |  5 PagesCorporate Social Responsibility Introduction Corporate social responsibility (CSR) is a concept which is also known as corporate citizenship, corporate conscience or in a simple way a responsible business. It is an integrated concept of self-regulatory business model for any organisation. Corporate Social Responsibility has been in practice for more than fifty years now, which has been adopted not only by domestic companies but also by transnational company with voluntary CSR initiativesRead MoreVolvo : Corporate Social Responsibility1155 Words   |  5 Pages Volvo in Corporate Social Responsibility. Avinash Adapa(1678167) Prof Eleni P.Mylonas EPS 8R Fairleigh Dickinson University DATE: 09-27-2014 Abstract Corporate Social Responsibility means their responsibility towards the community and the environmentRead MoreCorporate Social Responsibility On A Social Level1086 Words   |  5 Pagesis to understand how a large progressive company operates in the corporate world as well as fulfills their corporate responsibility on a social level. While corporate responsibility is important, it is always viewed through the fiscal viability dimension of the maelstrom. The business case dominates the representation and operationalization of corporate responsibility. Due to the increased public sensitivity to corporate responsibility, the attitude has evolved from the unnecessary intrusion, throughRead MoreCorporate Social Responsibility in the Philippines1221 Words   |  5 Pagescompanies that produce them. Companies are now being scrutinized as never before and they are made to measure up to standards of environmental sustainability, ethical behavior and governance structures. Questions arise on what else they can do to make poverty history given their access to talent, resources, technology, information and capital. The quality of the company’s response to these questions - the way they express corporate social responsibility - has become as much of an asset as brandsRead MoreCorporate Social Responsibility Is A Hard Edged Business Decision1073 Words   |  5 Pagesâ€Å"Corporate social responsibility is a hard-edged business decision. Not because it is a nice thing to do or because people are forcing us to do it... because it is good for our business† (Fitzerald, n.d.). In view of the aforementioned citation, it dispenses an intuitive frame of reference into the purpose of this case assignment. As this paper will be expounding upon both the short and long-term ramifications of corporate social responsibility (CSR). Moreover, this case assignment will review

Computer Development from 1970-1990 Free Essays

string(308) " records of goods on hand, the quantities of the items to be ordered by the company, and the records of the items that the company had currently run out of in stock; and marketing and sales, which determined from sales statistics the best combination of products to sell or a maximum profit for the company\." Alienation. Computerization. Employment. We will write a custom essay sample on Computer Development from 1970-1990 or any similar topic only for you Order Now Mass-production. These are some of the words associated with the introduction of computers into the work environment, mainly beginning on a large scale basis in 1970 and continuing on to the present day and beyond. Between the 1970†³s and 1990†³s, the work environment was impacted significantly. This initial development of computers for use in industry and business played an important role in the development of businesses. New jobs have been created to deal with computers. Mundane, repetitive jobs have been taken over by computers. The computer has even been introduced to the management level of businesses to assist in decision making. All around the office, computers have become commonplace (Spencer 107). But what were these industries like before computers came to their assistance? Obviously, commerce functioned prior to the introduction of computers. However, employees were required to perform many tasks that automation eventually made easier. These tasks have predominantly consisted of clerical operations, such as check processing, payroll, inventory control, bookkeeping, etc. However, automation lso included other tasks at the industrial and management level such as business planning, marketing reports and sales reports. Most of these tasks were performed using pencil and paper, or in some cases, the typewriter, and every record or other document was stored by means of some filing method such as filing cabinets or book shelves. Other tasks, such as those involving the manipulation of machinery were done by hand. If a machine had to be assembled, it was assembled using â€Å"mostly-human† assembly lines. Machines were not around to assist in handling substances; substance manipulation and ata reception from chemicals was also dealt with by hand (Stern and Stern 238). In essence, many tasks that were dealt with by hand were either repetitive, dangerous, or both. As one might speculate, problems then arose from the methods of handling these tasks. Every task was subject to some type of human error, whether it was a mistake in adding, a misspelling of a name or organization, the improper filing of a certain document, etc. At times, employees were simply not able to process the volume of data coming into their workplaces. This caused companies to get behind in their operations nd records, which in turn yielded a loss in revenue. Many companies fell behind in this way because of the manual system†s inability to accommodate for the growth of the industry. In turn, this affected the management departments of businesses, which relied upon up-to-date information from their employees in order for them to make decisions on time (239). Also, workers accidentally injured themselves in some of the dangerous work environments involving machinery and volatile chemicals, because many of the employees were required to work very near to machinery or toxic chemicals, and were ot given much protection from the hazards created by the noxious vapors rising from chemicals or malfunctions in machinery. An answer to these problems needed to be Perhaps that answer lied in computers. They provided the solutions businesses and industries needed to handle repetitive and dangerous jobs. Computers were able to assist clerks in their operations. Injuries could be reduced that were caused by accidents with chemicals or machinery (237). These solutions impacted the employment aspect of industry by making jobs become safer and less repetitive. Employees began to be hired to erform different tasks as a result of the change in the tasks to be performed (de Ferranti 70). Employees began to become involved with computers in business in order to satisfy several objectives. Systems were installed for employees to assist in the reduction of record-keeping by automating most of the functions performed by the clerks. Files were automatically inserted in their proper order, and could be recovered from the computer†s memory and reviewed almost instantaneously. Also, inputting the information into the computer and allowing it to perform certain operations such as adding and sorting esulted in the reduction of errors in record-keeping operations. Computers also assisted the management of a company by providing managers or executives with up-to-date information used for decision making (Stern and Stern 237). Computers provided employees with a way to more quickly and accurately process larger volumes of business data, thus being beneficial to the company as a whole by allowing them to operate more The types of business data that many of these employees had to process include all the information received by a company. When these data are processed, their information s outputted, and is needed by the managers of the business. The managers, using these data, then establish, evaluate, and adjust the goals of the business, develop plans and standards and initiate the actions needed to accomplish them, and measure the actual performance of the company and take appropriate action when it is needed to improve the company†s performance. All of these tasks are essential to the function of any business, and the business data from them was processed using a number of steps (Dorf 135-136). First, the data must be separated into their appropriate classification. Second, the data must be sorted into a pre-arranged sequence designated by the manager or some other employee involved in the sorting process. Third, any mathematical operations that must be performed on the data are carried out. Finally, the data is summarized for use in reports. After the data has been summarized, it is stored for future use or retrieved. Sometimes the data need to be duplicated for documents or communicated to an employee (136). These employees needed to process many different types of these data. Some of these types included account reception, which involved the processing of records nvolving the reception money owed to the company by others; account payment, which handled the processing of the money that the company owed to others; payroll, which dealt with the records of employees to be paid, the pay rates of the employees, the hours that the employees worked, etc. inventory control, which encompassed the holding of records of goods on hand, the quantities of the items to be ordered by the company, and the records of the items that the company had currently run out of in stock; and marketing and sales, which determined from sales statistics the best combination of products to sell or a maximum profit for the company. You read "Computer Development from 1970-1990" in category "Essay examples" It was important that each of these types was properly processed, and the computer allowed employees to more easily process this wide variety of data that was generated (Stern and Stern 238). Because employees were more easily able to manipulate the business data they received, the automation of these processes in the office allowed for greater efficiency. Clerks were no longer obligated to file documents using filing cabinets or shelves. Instead, they recorded and stored the information inside of the memory of a computer. Also, clerks could use word processing systems to minimize the need to retype erroneous pages, create standardized letter heads, and maintain letters in files containing text, providing a tremendous advantage over the use of the typewriter, which did not allow for any of these options. Sometimes letter heads did not even need to be printed; primitive office e-mail developed in the 1970†³s allowed for the quicker transmission of information to branch offices without the cost of postage or postal services and was also faster. Sending information to companies through the postal system took days while the ransmission of data with e-mail took mere seconds or minutes. By giving branch offices information more quickly, businesses enabled themselves to increase their production, because they did not need to wait to receive information or reports from other offices or departments that was being sent through the mail (251-253). This increase in production that resulted from the computer allowed for a big step in the direction of maximum efficiency for a businesses. The great efficiency potential of computers shone the brightest when their rapid speed was used to perform repetitious tasks handling these large amounts of data (Dorf 137). Handling large amounts of data allowed companies to better interact with one another, because they allowed companies to get more recent information on the production and financial well-being of their competitors. The estimated increase in the amount of business transactions between companies and people per year during the 1970†³s was 8 to 15 percent. The mass of data transmitted through lines was growing by a rate of 25 percent. Because the mass of data received by companies was growing, it was necessary to use computers to capitalize on Partly contributing to the increase in data was the improvements made in the ediums in which data was transmitted. As well as needing accurate and up-to-date information, business managements needed information that was also easier to read and comprehend. In order for information to be reviewed more efficiently and more comprehensively, graphics systems were developed to improve the readability of the information. The development of graphics in business data began in the early 1970†³s with text-drawn images of bar graphs and simple charts. The computer was utilized to create these graphs because it could prepare them quickly by immediately calling upon the data within its memory. Later, graphical input/output devices were developed to display and manipulate this data directly to some type of screen. The graphical information display monitor was (and still remains) the most effective method of presenting information to users. Clear and understandable information, as well as fast, accurate, and up-to-date information, is essential for the success of the management in The introduction of computers into the management environment naturally changed it as well. The managers of businesses altered their techniques in order to accommodate for the changes in industry and business brought on by the computer and apitalize on the benefits. These techniques changed in several ways. For instance, executives were put into closer contact with the activities that they controlled. This was because the computer enabled them to access facts from databases, immediately giving them information on the status of the department they oversaw. In some situations, the computer even allowed executives to give instructions more quickly directly to their subordinates. Also, management was affected in each of its 3 sublevels: low, middle, and top. Low management was provided with all the facts essential to the activities of the usiness such as awareness of employee activities, the availability of materials, work flow, and details about their field. Middle management was involved with the progress of the work under its control. Top management concerned itself with summarized reports and analyses that were free of the details used by middle management. By being able to process data more quickly and accurately, the computer could be used to send the appropriate information to its corresponding level more quickly, sifting through the facts and details in the business data, and discarding useless information for each level of By being able to manage data on each level more efficiently, the life of the manager was made easier by computers. Computers assisted the manager in several other processes besides error reduction and data handling. The speed at which computers work helped managers deal with time management in business. In reducing the cost for an item so that more items will be bought by the consumer, the production time should also be reduced and the efficiency of computers allowed for businesses to become cost-efficient. Besides being cost efficient where production is concerned, computers also reduce the eed for a clerical workforce. Clerical tasks, which tended to be more mundane, could be performed by computers. Clerical employee costs for the business could then be reduced, but this resulted in layoffs and alienation amongst employees. This rapid, low-cost, low-error business that computers assisted managers in running became the fuel for employees† fears about computers (Dorf 136). These fears were one of the problems produced by computers. However, in addition to some of the problems it created, it also revealed new solutions. One problem actually results from the faster rate at which computers process data. Because they process data faster, any mistakes made due to incorrect programming will be much larger since more information will have been processed incorrectly. Any manager must plan alternatives to their computerized methods just to accommodate for unexpected errors produced by unique data streaming through the computer. At many times, â€Å"bugs† in programs may not be realized until a certain unique type of data is entered and processed, and because of the large mass of data processed by the computer in businesses on a daily basis, it is only a matter of time until these hidden bugs are revealed. Even though their are some negative repercussions to using computers, businesses are made more flexible by computers because they are multi-functional and can be used to perform more than one task. Computers also allow for the establishment of control over manufacturing by allowing the management to more directly observe the function of the business by reviewing the data the computer returns about the status of the business (155-156). These examples illustrate how the computer†s impact cannot only be positive, but negative also. In order to capitalize on the positive aspects, an important factor in effective anagement with computers is detailed planning. Proper planning can allow for the smarter choosing of workers, the right amount of materials, etc. Computers can help planners optimize schedules by choosing the best employees for a type of job from an index. Computerized information storage and retrieval systems are capable of storing vast amounts of data in a centralized data bank that can be accessed from miles away. This allows access to the data from anywhere, letting business managements stationed in different branches of a company in different locations have access to the same data bank s the rest of the company. Because information does not have to physically be transferred from one place to another, planning can take place faster and with greater In addition to being most effective with proper planning, computers are used most effectively within a business of any moderate size or larger, and are most successful in business data processing operations possessing one of the following characteristics: when the business receives a large volume of data generated from transactions on a regular basis, when an operation is repeated many times in order to make investments in ebugging, development, and improvement worth the financial expenditure to have software updated, when the business has a need for information quickly; and when the business has a need for reliable and accurate results. However, the success of computers in a business is more dependent on the effectiveness of the management rather than on the actual hardware capabilities. Computers can be a useful tool for managements to control and guide businesses, but they must be used properly and to their fullest capabilities to ensure the success of the business to make them worth the investment. This investment can only be capitalized on when computers are used to their full ability. The gap between computers† capabilities and the actual use of those capabilities has been increasing since computers became more prominent in businesses in the 1970†³s and the 1980†³s. Computers often were used for very simplistic tasks such as simple arithmetic, despite the fact that they possessed the capabilities to perform more complex tasks such as controlling manufacturing operations, optimizing the transportation of products, and improving the quality of managerial decisions (144). In many cases, omputers have not reduced the cost of operations in a company, but have rather simply provided better data processing and better service. Basically, a simple principle can be seen in the use of the computer for business tasks: if the functions of the computer are used poorly, the company may actually incur financial losses. However, if the functions of the computer are used to their full potential efficiently and effectively, the financial return will definitely be positive. (145). Several general businesses have experienced positive financial return as a result of the utilization of computers. One of these businesses is banking. Between 1940 and 1970, the volume of check transactions in banks has increased 1100 percent, which is an unbelievably large mass of data to be processed. Normally, this would be the archetypal work of a bank clerk; however, because of the introduction of the computer, this immense volume can be handled with relative ease by allowing banks to process checks faster and more cost-efficiently because the computer is able to record, compute, and edit the balances of myriad†s of accounts in seconds by calling upon them in its memory (Spencer 107). When one went to the bank to process a check, his or her checks were utomatically processed then credited to or drawn against the individual†s bank accounts in hours instead of days or weeks. This made it possible for large banks to process millions of items per day. Now, the use of computers for the day-to-day processing of customer accounts and checks has become routine (107). Another use for the processing power of computers was in the stock market, where an immense volume of trading occurs daily. This large mass of trading creates an equally large mass of paperwork. In the 1970†³s, sometimes the trading needed to be halted to allow brokers to catch up with their aperwork. Every broker had to figure every transaction the day before they had to open again for business. Naturally, because they had to act quickly, brokers would also make errors. The introduction of the computer into their domain allowed brokers to process millions of accounts daily and remain in business. Also, bookkeeping errors are always avoided with the computer (provided that the data was inputted correctly by the user), and information was even posted faster (109). Without the assistance of computers, stock transactions would not be able to occur at the rates they do today. Payrolls in business ere also significantly affected by computers. Computers could generate pay reports to handle the employees of a large corporation. Because payroll involves many functions repetitively, such as earning rates, tax withholdings, net pay, year to date quantities, pay deductions, union dues, etc. it becomes a task very suitable to a computer†s purpose; it eliminates the time-consuming and tedious review of employee files and records (115). Factories and manufacturing industries did not escape the positive and negative influences of the computer either. It was predicted that computers would bring about a quiet revolution† in industry. In 1970, it was estimated that 5 percent of the GNP was produced by some means of computing. Despite this figure, many companies did not totally opt for computer systems. Instead, they employed the assistance of agencies called bureaus, â€Å"largely providing for managements who have opted out of computing (de Ferranti 65-66). † Bureaus were companies that specialized in the management of business using the computer. Instead of actually purchasing a computer, the management of a company could employ the services of the bureaus, which would assist them in the anagement of their companies the use of the computers the bureau used. In this way, the companies would be â€Å"indirectly† using computers through the bureaus to manage themselves. It was thought that the bureaus would grow more quickly than the industries they supported as a result of the large profit they received for their services. This was proven true in England, where the amount of computers purchased by 1980 was only 6 times what it had been in 1965, while the bureaus grew by a rate of 30 times. However because bureaus were very sparse in the United States, the number of computers in ndustry expanded partly as a result of them not having to invest in the services of the bureaus. Industries tended to invest in their own computer systems in order provide their management with direct control over the industry†s employees and production (66). These industries bought several types of computers in the 1980†³s, useful for various tasks. One type of machine was the Turnkey System, which was a hardware and software package that was designed to perform one specific task. As the name implies, the user â€Å"turns a key† and the machine operates automatically. The advantage to this ystem is that it may be used without any computer expertise. The disadvantage, a rather obvious problem, is that the machine can be used to perform only one task, the task that it was written to do. The other type of computer was the special-purpose computer, which could be programmed to perform a variety of tasks. The advantage to using this system is that it is versatile and can perform different tasks. However, the drawback is that computer expertise is required to operate and change the tasks of the system (Stern and Stern 262). Another type of computer system was Computer Aided Design (CAD). CAD onsisted of a system that was equipped with CAD software that could be used for the design, development, and testing of any type of equipment. It could also handle fine details in drawing, and makes use of the computer†s ability to measure to very small units. CAD allowed engineers of systems to do stress analyses, weight analyses, and structural analyses to be simulated on a model construction that appeared on the computer monitor. In essence, engineers could test something†s design before it was built to determine design flaws and save on cost (263). With a small variety of computerized systems to use, manufacturing also mployed the computer in its operations. In the 1980†³s, 20 percent of all computers were being used for manufacturing purposes. Twenty-billion dollars were spent on computers for manufacturing. The ultimate goal of automating the factory was to, as always, maximize efficiency and minimize the need for operator intervention (254). In fact, computers controlled several activities manufacturing. One such activity was called process control, which used computers to process the continuous flow of materials in a system such as in the production of chemicals in a chemical plant or oil in a refinery. The omputers were involved in measuring and regulating the flow of the fluid into the tank, the pressure in the tank, the temperature in the tank, etc. As the system monitored the tank, it would inform the user of problems and sometimes would attempt to fix the problems on its own (254). The reason computers were used in process control was because computers had the ability to operate and take data samples efficiently and for an infinite time period (until the machine eventually broke down years later). Also, while it was gathering data, the computer could monitor the levels of material and its attributes all the time to maximize safety. Sometimes process control systems were controlled with feedback mechanisms, which allowed them to evaluate and correct their own efficiency by adjusting their operation to meet certain criteria of efficiency (255). Another type of activity performed by computers in manufacturing was production control, where computers monitored, controlled, and scheduled assembly lines. In this situation, the computer was used to monitor the time spent on certain activities at given stations, specify the status of the products and tools needed for them, indicate any faulty equipment, and alert supervisors of timing problems that tend to form ueues at each station. Because computers are inanimate machines, they could be relied upon to supervise an assembly line indefinitely, which was one of the main advantages for using computers along the assembly lines. As well as having â€Å"infinite patience,† computers also could perform a repeated task identically, because the exact movements it was to follow were programmed into it, and unless another operator altered these instructions, it would not deviate from them. A good example of this uniformity resulting from computer use is in the use of it to monitor and control robots in car manufacturing Computers in manufacturing yielded many benefits to companies, both tangible, and intangible. The tangible benefits included faster processing, greater accuracy, flexibility in design modifications, independent machinery which could be run unchecked for some time, cost reduction, larger output, and an increased uniformity in the products produced because each was produced using the same abstract programmed into the computer which performed the task the same way every time (260-261). The intangible benefits included better quality control, more effective scheduling of shipments, simpler lanning requirements because the machines functioned the same way every time they were run, need for a reduced inventory, and increased job satisfaction, because the workers were free to work in less mundane positions. Workers with tedious or monotonous jobs often had little incentive to work and this therefore impacted production. However, when the computer was introduced, the workers could be put to use in more interesting tasks that did not always require repetitive work. However, some factory managements were striving for the ideal goal of manufacturing: to create the automated factory† where computers would handle every step in the manufacturing process (261-262) and would be maintenanced only occasionally by manufacturing supervisors. This goal would certainly increase revenue for the company, however, it would also increase unemployment and poverty throughout the country, so it would be a very unrealistic possibility that factories will ever become fully automated. The use of computers in business and industry increased dramatically over the period between 1970 and 1980, where it was estimated that every businessman was involved with computers and their techniques in one way or another. Such businessmen were called â€Å"New Businessmen† because they were involved with the new field of computers, and every new businessman needed at least a basic knowledge of the computer for employment. In the mid 1970†³s, the total number of terminals installed in businesses and industry was estimated to be greater than 7000. The amount of terminals explicitly used for business exceeded 250,000 by 1980 (de Ferranti 70). The government use of computers surpassed businesses† use of computers however, and was operating 20,000 machines in 1970, which means they were using 3 times the machines that the people were using at that time (70-71). In 1974, the Wall Street Journal conducted a survey on the computer use in businesses, surveying their subscribers. Two-thirds of the surveyed group said that their companies owned at least 1 computer. Ninety percent of the large companies surveyed owned a computer, and 73 percent of companies employing less than 100 people owned a computer. The leading applications used by the companies were; accounting, with 76 percent; sales analysis, with 46 percent; and inventory control, with 43 percent. Clearly the nation†s economy, as a result of the investment for computers and the use of them in industry, had been affected (Dorf 137). Even in 1970, businesses were connected to online systems that allowed them to transfer data to other companies. The ways of accessing online services were increasing at that time, and allowed information to be inputted into one computer and sent to others in the area quickly (de Ferranti 67-68). Cable connections were used to connect systems to local branch companies to allow for quick information transmission. By 1980, the connection speed of a computer was one-third of the time it used to take in the 1970s. This increase in connection speed led to the use of businesses spending more hours online ransmitting data. This was a big increase from the time users in plants used to spend on the phone with other companies — 6 minutes. This also increased a company†s expenditure on phone line connections. In house machines also enabled the â€Å"New Businessmen† to transmit work to terminals in their homes and back to manipulate the information they need without having to physically transport it (70). However, none of these achievements in computers was without some cost by the United States and its population. In 1970, $25. 5 billion were spent to utilize computers for all purposes. In 1975, $51. billion were spent for the same purpose, which was a triple of what the expenditures were 10 years before. About $8. 3 billion of the $25. 5 billion spent in 1970 was spent on equipment. Managements often began purchasing computer power as if it were a utility like natural gas or electricity. However, the revenues generated by the installations of these systems most likely offset the actual cost for the systems (Dorf 137). In essence, the machines paid for themselves by allowing the company to increase its efficiency and increase its overall revenue. And what about the common working man? Computers were generally a benefit o the working man or trained employee because they provided better jobs . However, one-fourth of the computer jobs were left to computer specialists in the 1970†³s. Another effect of computers on workers in the 1980†³s was alienation. Alienation was a term used to describe those people who were directly affected by automation in jobs or in everyday life. Computers created a feeling of displacement and dissatisfaction in them, and felt that computers would take the place of human labor and activities. A survey in the 1980†³s revealed that almost 50 out of the 1513 people surveyed felt alienated. When omputers began to replace the jobs of some men, they lost pride in themselves. They felt that they were being told that their jobs were too menial and worthless after being told that computer would be performing them. Many workers were affected emotionally because they felt that they had become inferior to computers (Stern and Stern 266). Employers had to be take steps to quell the discomfort felt by some workers over the introduction of the computer into their lives. And steps were taken to prevent alienation in the workplace. A famous experiment conducted by Elton Mayo and Fritz J. Roethlisberger at the Western Electric Co. in Hawthorne, NJ, from 1927-1932 called the Hawthorne Experiment accidentally revealed a method of preventing alienation. Mayo and Roethlisberger were studying what balance of physical conditions, labor, and coffee breaks would maximize productivity. However, regardless of the ways they changed the physical conditions, the productivity rose. Upon investigating by interviewing the workers, they were told by the workers that they were flattered that anyone would take notice of them and wish to do an experiment that would benefit them, so they felt as if they should work their best (267). Thus, they disco How to cite Computer Development from 1970-1990, Essay examples

Computer Development from 1970-1990 Free Essays

string(308) " records of goods on hand, the quantities of the items to be ordered by the company, and the records of the items that the company had currently run out of in stock; and marketing and sales, which determined from sales statistics the best combination of products to sell or a maximum profit for the company\." Alienation. Computerization. Employment. We will write a custom essay sample on Computer Development from 1970-1990 or any similar topic only for you Order Now Mass-production. These are some of the words associated with the introduction of computers into the work environment, mainly beginning on a large scale basis in 1970 and continuing on to the present day and beyond. Between the 1970†³s and 1990†³s, the work environment was impacted significantly. This initial development of computers for use in industry and business played an important role in the development of businesses. New jobs have been created to deal with computers. Mundane, repetitive jobs have been taken over by computers. The computer has even been introduced to the management level of businesses to assist in decision making. All around the office, computers have become commonplace (Spencer 107). But what were these industries like before computers came to their assistance? Obviously, commerce functioned prior to the introduction of computers. However, employees were required to perform many tasks that automation eventually made easier. These tasks have predominantly consisted of clerical operations, such as check processing, payroll, inventory control, bookkeeping, etc. However, automation lso included other tasks at the industrial and management level such as business planning, marketing reports and sales reports. Most of these tasks were performed using pencil and paper, or in some cases, the typewriter, and every record or other document was stored by means of some filing method such as filing cabinets or book shelves. Other tasks, such as those involving the manipulation of machinery were done by hand. If a machine had to be assembled, it was assembled using â€Å"mostly-human† assembly lines. Machines were not around to assist in handling substances; substance manipulation and ata reception from chemicals was also dealt with by hand (Stern and Stern 238). In essence, many tasks that were dealt with by hand were either repetitive, dangerous, or both. As one might speculate, problems then arose from the methods of handling these tasks. Every task was subject to some type of human error, whether it was a mistake in adding, a misspelling of a name or organization, the improper filing of a certain document, etc. At times, employees were simply not able to process the volume of data coming into their workplaces. This caused companies to get behind in their operations nd records, which in turn yielded a loss in revenue. Many companies fell behind in this way because of the manual system†s inability to accommodate for the growth of the industry. In turn, this affected the management departments of businesses, which relied upon up-to-date information from their employees in order for them to make decisions on time (239). Also, workers accidentally injured themselves in some of the dangerous work environments involving machinery and volatile chemicals, because many of the employees were required to work very near to machinery or toxic chemicals, and were ot given much protection from the hazards created by the noxious vapors rising from chemicals or malfunctions in machinery. An answer to these problems needed to be Perhaps that answer lied in computers. They provided the solutions businesses and industries needed to handle repetitive and dangerous jobs. Computers were able to assist clerks in their operations. Injuries could be reduced that were caused by accidents with chemicals or machinery (237). These solutions impacted the employment aspect of industry by making jobs become safer and less repetitive. Employees began to be hired to erform different tasks as a result of the change in the tasks to be performed (de Ferranti 70). Employees began to become involved with computers in business in order to satisfy several objectives. Systems were installed for employees to assist in the reduction of record-keeping by automating most of the functions performed by the clerks. Files were automatically inserted in their proper order, and could be recovered from the computer†s memory and reviewed almost instantaneously. Also, inputting the information into the computer and allowing it to perform certain operations such as adding and sorting esulted in the reduction of errors in record-keeping operations. Computers also assisted the management of a company by providing managers or executives with up-to-date information used for decision making (Stern and Stern 237). Computers provided employees with a way to more quickly and accurately process larger volumes of business data, thus being beneficial to the company as a whole by allowing them to operate more The types of business data that many of these employees had to process include all the information received by a company. When these data are processed, their information s outputted, and is needed by the managers of the business. The managers, using these data, then establish, evaluate, and adjust the goals of the business, develop plans and standards and initiate the actions needed to accomplish them, and measure the actual performance of the company and take appropriate action when it is needed to improve the company†s performance. All of these tasks are essential to the function of any business, and the business data from them was processed using a number of steps (Dorf 135-136). First, the data must be separated into their appropriate classification. Second, the data must be sorted into a pre-arranged sequence designated by the manager or some other employee involved in the sorting process. Third, any mathematical operations that must be performed on the data are carried out. Finally, the data is summarized for use in reports. After the data has been summarized, it is stored for future use or retrieved. Sometimes the data need to be duplicated for documents or communicated to an employee (136). These employees needed to process many different types of these data. Some of these types included account reception, which involved the processing of records nvolving the reception money owed to the company by others; account payment, which handled the processing of the money that the company owed to others; payroll, which dealt with the records of employees to be paid, the pay rates of the employees, the hours that the employees worked, etc. inventory control, which encompassed the holding of records of goods on hand, the quantities of the items to be ordered by the company, and the records of the items that the company had currently run out of in stock; and marketing and sales, which determined from sales statistics the best combination of products to sell or a maximum profit for the company. You read "Computer Development from 1970-1990" in category "Essay examples" It was important that each of these types was properly processed, and the computer allowed employees to more easily process this wide variety of data that was generated (Stern and Stern 238). Because employees were more easily able to manipulate the business data they received, the automation of these processes in the office allowed for greater efficiency. Clerks were no longer obligated to file documents using filing cabinets or shelves. Instead, they recorded and stored the information inside of the memory of a computer. Also, clerks could use word processing systems to minimize the need to retype erroneous pages, create standardized letter heads, and maintain letters in files containing text, providing a tremendous advantage over the use of the typewriter, which did not allow for any of these options. Sometimes letter heads did not even need to be printed; primitive office e-mail developed in the 1970†³s allowed for the quicker transmission of information to branch offices without the cost of postage or postal services and was also faster. Sending information to companies through the postal system took days while the ransmission of data with e-mail took mere seconds or minutes. By giving branch offices information more quickly, businesses enabled themselves to increase their production, because they did not need to wait to receive information or reports from other offices or departments that was being sent through the mail (251-253). This increase in production that resulted from the computer allowed for a big step in the direction of maximum efficiency for a businesses. The great efficiency potential of computers shone the brightest when their rapid speed was used to perform repetitious tasks handling these large amounts of data (Dorf 137). Handling large amounts of data allowed companies to better interact with one another, because they allowed companies to get more recent information on the production and financial well-being of their competitors. The estimated increase in the amount of business transactions between companies and people per year during the 1970†³s was 8 to 15 percent. The mass of data transmitted through lines was growing by a rate of 25 percent. Because the mass of data received by companies was growing, it was necessary to use computers to capitalize on Partly contributing to the increase in data was the improvements made in the ediums in which data was transmitted. As well as needing accurate and up-to-date information, business managements needed information that was also easier to read and comprehend. In order for information to be reviewed more efficiently and more comprehensively, graphics systems were developed to improve the readability of the information. The development of graphics in business data began in the early 1970†³s with text-drawn images of bar graphs and simple charts. The computer was utilized to create these graphs because it could prepare them quickly by immediately calling upon the data within its memory. Later, graphical input/output devices were developed to display and manipulate this data directly to some type of screen. The graphical information display monitor was (and still remains) the most effective method of presenting information to users. Clear and understandable information, as well as fast, accurate, and up-to-date information, is essential for the success of the management in The introduction of computers into the management environment naturally changed it as well. The managers of businesses altered their techniques in order to accommodate for the changes in industry and business brought on by the computer and apitalize on the benefits. These techniques changed in several ways. For instance, executives were put into closer contact with the activities that they controlled. This was because the computer enabled them to access facts from databases, immediately giving them information on the status of the department they oversaw. In some situations, the computer even allowed executives to give instructions more quickly directly to their subordinates. Also, management was affected in each of its 3 sublevels: low, middle, and top. Low management was provided with all the facts essential to the activities of the usiness such as awareness of employee activities, the availability of materials, work flow, and details about their field. Middle management was involved with the progress of the work under its control. Top management concerned itself with summarized reports and analyses that were free of the details used by middle management. By being able to process data more quickly and accurately, the computer could be used to send the appropriate information to its corresponding level more quickly, sifting through the facts and details in the business data, and discarding useless information for each level of By being able to manage data on each level more efficiently, the life of the manager was made easier by computers. Computers assisted the manager in several other processes besides error reduction and data handling. The speed at which computers work helped managers deal with time management in business. In reducing the cost for an item so that more items will be bought by the consumer, the production time should also be reduced and the efficiency of computers allowed for businesses to become cost-efficient. Besides being cost efficient where production is concerned, computers also reduce the eed for a clerical workforce. Clerical tasks, which tended to be more mundane, could be performed by computers. Clerical employee costs for the business could then be reduced, but this resulted in layoffs and alienation amongst employees. This rapid, low-cost, low-error business that computers assisted managers in running became the fuel for employees† fears about computers (Dorf 136). These fears were one of the problems produced by computers. However, in addition to some of the problems it created, it also revealed new solutions. One problem actually results from the faster rate at which computers process data. Because they process data faster, any mistakes made due to incorrect programming will be much larger since more information will have been processed incorrectly. Any manager must plan alternatives to their computerized methods just to accommodate for unexpected errors produced by unique data streaming through the computer. At many times, â€Å"bugs† in programs may not be realized until a certain unique type of data is entered and processed, and because of the large mass of data processed by the computer in businesses on a daily basis, it is only a matter of time until these hidden bugs are revealed. Even though their are some negative repercussions to using computers, businesses are made more flexible by computers because they are multi-functional and can be used to perform more than one task. Computers also allow for the establishment of control over manufacturing by allowing the management to more directly observe the function of the business by reviewing the data the computer returns about the status of the business (155-156). These examples illustrate how the computer†s impact cannot only be positive, but negative also. In order to capitalize on the positive aspects, an important factor in effective anagement with computers is detailed planning. Proper planning can allow for the smarter choosing of workers, the right amount of materials, etc. Computers can help planners optimize schedules by choosing the best employees for a type of job from an index. Computerized information storage and retrieval systems are capable of storing vast amounts of data in a centralized data bank that can be accessed from miles away. This allows access to the data from anywhere, letting business managements stationed in different branches of a company in different locations have access to the same data bank s the rest of the company. Because information does not have to physically be transferred from one place to another, planning can take place faster and with greater In addition to being most effective with proper planning, computers are used most effectively within a business of any moderate size or larger, and are most successful in business data processing operations possessing one of the following characteristics: when the business receives a large volume of data generated from transactions on a regular basis, when an operation is repeated many times in order to make investments in ebugging, development, and improvement worth the financial expenditure to have software updated, when the business has a need for information quickly; and when the business has a need for reliable and accurate results. However, the success of computers in a business is more dependent on the effectiveness of the management rather than on the actual hardware capabilities. Computers can be a useful tool for managements to control and guide businesses, but they must be used properly and to their fullest capabilities to ensure the success of the business to make them worth the investment. This investment can only be capitalized on when computers are used to their full ability. The gap between computers† capabilities and the actual use of those capabilities has been increasing since computers became more prominent in businesses in the 1970†³s and the 1980†³s. Computers often were used for very simplistic tasks such as simple arithmetic, despite the fact that they possessed the capabilities to perform more complex tasks such as controlling manufacturing operations, optimizing the transportation of products, and improving the quality of managerial decisions (144). In many cases, omputers have not reduced the cost of operations in a company, but have rather simply provided better data processing and better service. Basically, a simple principle can be seen in the use of the computer for business tasks: if the functions of the computer are used poorly, the company may actually incur financial losses. However, if the functions of the computer are used to their full potential efficiently and effectively, the financial return will definitely be positive. (145). Several general businesses have experienced positive financial return as a result of the utilization of computers. One of these businesses is banking. Between 1940 and 1970, the volume of check transactions in banks has increased 1100 percent, which is an unbelievably large mass of data to be processed. Normally, this would be the archetypal work of a bank clerk; however, because of the introduction of the computer, this immense volume can be handled with relative ease by allowing banks to process checks faster and more cost-efficiently because the computer is able to record, compute, and edit the balances of myriad†s of accounts in seconds by calling upon them in its memory (Spencer 107). When one went to the bank to process a check, his or her checks were utomatically processed then credited to or drawn against the individual†s bank accounts in hours instead of days or weeks. This made it possible for large banks to process millions of items per day. Now, the use of computers for the day-to-day processing of customer accounts and checks has become routine (107). Another use for the processing power of computers was in the stock market, where an immense volume of trading occurs daily. This large mass of trading creates an equally large mass of paperwork. In the 1970†³s, sometimes the trading needed to be halted to allow brokers to catch up with their aperwork. Every broker had to figure every transaction the day before they had to open again for business. Naturally, because they had to act quickly, brokers would also make errors. The introduction of the computer into their domain allowed brokers to process millions of accounts daily and remain in business. Also, bookkeeping errors are always avoided with the computer (provided that the data was inputted correctly by the user), and information was even posted faster (109). Without the assistance of computers, stock transactions would not be able to occur at the rates they do today. Payrolls in business ere also significantly affected by computers. Computers could generate pay reports to handle the employees of a large corporation. Because payroll involves many functions repetitively, such as earning rates, tax withholdings, net pay, year to date quantities, pay deductions, union dues, etc. it becomes a task very suitable to a computer†s purpose; it eliminates the time-consuming and tedious review of employee files and records (115). Factories and manufacturing industries did not escape the positive and negative influences of the computer either. It was predicted that computers would bring about a quiet revolution† in industry. In 1970, it was estimated that 5 percent of the GNP was produced by some means of computing. Despite this figure, many companies did not totally opt for computer systems. Instead, they employed the assistance of agencies called bureaus, â€Å"largely providing for managements who have opted out of computing (de Ferranti 65-66). † Bureaus were companies that specialized in the management of business using the computer. Instead of actually purchasing a computer, the management of a company could employ the services of the bureaus, which would assist them in the anagement of their companies the use of the computers the bureau used. In this way, the companies would be â€Å"indirectly† using computers through the bureaus to manage themselves. It was thought that the bureaus would grow more quickly than the industries they supported as a result of the large profit they received for their services. This was proven true in England, where the amount of computers purchased by 1980 was only 6 times what it had been in 1965, while the bureaus grew by a rate of 30 times. However because bureaus were very sparse in the United States, the number of computers in ndustry expanded partly as a result of them not having to invest in the services of the bureaus. Industries tended to invest in their own computer systems in order provide their management with direct control over the industry†s employees and production (66). These industries bought several types of computers in the 1980†³s, useful for various tasks. One type of machine was the Turnkey System, which was a hardware and software package that was designed to perform one specific task. As the name implies, the user â€Å"turns a key† and the machine operates automatically. The advantage to this ystem is that it may be used without any computer expertise. The disadvantage, a rather obvious problem, is that the machine can be used to perform only one task, the task that it was written to do. The other type of computer was the special-purpose computer, which could be programmed to perform a variety of tasks. The advantage to using this system is that it is versatile and can perform different tasks. However, the drawback is that computer expertise is required to operate and change the tasks of the system (Stern and Stern 262). Another type of computer system was Computer Aided Design (CAD). CAD onsisted of a system that was equipped with CAD software that could be used for the design, development, and testing of any type of equipment. It could also handle fine details in drawing, and makes use of the computer†s ability to measure to very small units. CAD allowed engineers of systems to do stress analyses, weight analyses, and structural analyses to be simulated on a model construction that appeared on the computer monitor. In essence, engineers could test something†s design before it was built to determine design flaws and save on cost (263). With a small variety of computerized systems to use, manufacturing also mployed the computer in its operations. In the 1980†³s, 20 percent of all computers were being used for manufacturing purposes. Twenty-billion dollars were spent on computers for manufacturing. The ultimate goal of automating the factory was to, as always, maximize efficiency and minimize the need for operator intervention (254). In fact, computers controlled several activities manufacturing. One such activity was called process control, which used computers to process the continuous flow of materials in a system such as in the production of chemicals in a chemical plant or oil in a refinery. The omputers were involved in measuring and regulating the flow of the fluid into the tank, the pressure in the tank, the temperature in the tank, etc. As the system monitored the tank, it would inform the user of problems and sometimes would attempt to fix the problems on its own (254). The reason computers were used in process control was because computers had the ability to operate and take data samples efficiently and for an infinite time period (until the machine eventually broke down years later). Also, while it was gathering data, the computer could monitor the levels of material and its attributes all the time to maximize safety. Sometimes process control systems were controlled with feedback mechanisms, which allowed them to evaluate and correct their own efficiency by adjusting their operation to meet certain criteria of efficiency (255). Another type of activity performed by computers in manufacturing was production control, where computers monitored, controlled, and scheduled assembly lines. In this situation, the computer was used to monitor the time spent on certain activities at given stations, specify the status of the products and tools needed for them, indicate any faulty equipment, and alert supervisors of timing problems that tend to form ueues at each station. Because computers are inanimate machines, they could be relied upon to supervise an assembly line indefinitely, which was one of the main advantages for using computers along the assembly lines. As well as having â€Å"infinite patience,† computers also could perform a repeated task identically, because the exact movements it was to follow were programmed into it, and unless another operator altered these instructions, it would not deviate from them. A good example of this uniformity resulting from computer use is in the use of it to monitor and control robots in car manufacturing Computers in manufacturing yielded many benefits to companies, both tangible, and intangible. The tangible benefits included faster processing, greater accuracy, flexibility in design modifications, independent machinery which could be run unchecked for some time, cost reduction, larger output, and an increased uniformity in the products produced because each was produced using the same abstract programmed into the computer which performed the task the same way every time (260-261). The intangible benefits included better quality control, more effective scheduling of shipments, simpler lanning requirements because the machines functioned the same way every time they were run, need for a reduced inventory, and increased job satisfaction, because the workers were free to work in less mundane positions. Workers with tedious or monotonous jobs often had little incentive to work and this therefore impacted production. However, when the computer was introduced, the workers could be put to use in more interesting tasks that did not always require repetitive work. However, some factory managements were striving for the ideal goal of manufacturing: to create the automated factory† where computers would handle every step in the manufacturing process (261-262) and would be maintenanced only occasionally by manufacturing supervisors. This goal would certainly increase revenue for the company, however, it would also increase unemployment and poverty throughout the country, so it would be a very unrealistic possibility that factories will ever become fully automated. The use of computers in business and industry increased dramatically over the period between 1970 and 1980, where it was estimated that every businessman was involved with computers and their techniques in one way or another. Such businessmen were called â€Å"New Businessmen† because they were involved with the new field of computers, and every new businessman needed at least a basic knowledge of the computer for employment. In the mid 1970†³s, the total number of terminals installed in businesses and industry was estimated to be greater than 7000. The amount of terminals explicitly used for business exceeded 250,000 by 1980 (de Ferranti 70). The government use of computers surpassed businesses† use of computers however, and was operating 20,000 machines in 1970, which means they were using 3 times the machines that the people were using at that time (70-71). In 1974, the Wall Street Journal conducted a survey on the computer use in businesses, surveying their subscribers. Two-thirds of the surveyed group said that their companies owned at least 1 computer. Ninety percent of the large companies surveyed owned a computer, and 73 percent of companies employing less than 100 people owned a computer. The leading applications used by the companies were; accounting, with 76 percent; sales analysis, with 46 percent; and inventory control, with 43 percent. Clearly the nation†s economy, as a result of the investment for computers and the use of them in industry, had been affected (Dorf 137). Even in 1970, businesses were connected to online systems that allowed them to transfer data to other companies. The ways of accessing online services were increasing at that time, and allowed information to be inputted into one computer and sent to others in the area quickly (de Ferranti 67-68). Cable connections were used to connect systems to local branch companies to allow for quick information transmission. By 1980, the connection speed of a computer was one-third of the time it used to take in the 1970s. This increase in connection speed led to the use of businesses spending more hours online ransmitting data. This was a big increase from the time users in plants used to spend on the phone with other companies — 6 minutes. This also increased a company†s expenditure on phone line connections. In house machines also enabled the â€Å"New Businessmen† to transmit work to terminals in their homes and back to manipulate the information they need without having to physically transport it (70). However, none of these achievements in computers was without some cost by the United States and its population. In 1970, $25. 5 billion were spent to utilize computers for all purposes. In 1975, $51. billion were spent for the same purpose, which was a triple of what the expenditures were 10 years before. About $8. 3 billion of the $25. 5 billion spent in 1970 was spent on equipment. Managements often began purchasing computer power as if it were a utility like natural gas or electricity. However, the revenues generated by the installations of these systems most likely offset the actual cost for the systems (Dorf 137). In essence, the machines paid for themselves by allowing the company to increase its efficiency and increase its overall revenue. And what about the common working man? Computers were generally a benefit o the working man or trained employee because they provided better jobs . However, one-fourth of the computer jobs were left to computer specialists in the 1970†³s. Another effect of computers on workers in the 1980†³s was alienation. Alienation was a term used to describe those people who were directly affected by automation in jobs or in everyday life. Computers created a feeling of displacement and dissatisfaction in them, and felt that computers would take the place of human labor and activities. A survey in the 1980†³s revealed that almost 50 out of the 1513 people surveyed felt alienated. When omputers began to replace the jobs of some men, they lost pride in themselves. They felt that they were being told that their jobs were too menial and worthless after being told that computer would be performing them. Many workers were affected emotionally because they felt that they had become inferior to computers (Stern and Stern 266). Employers had to be take steps to quell the discomfort felt by some workers over the introduction of the computer into their lives. And steps were taken to prevent alienation in the workplace. A famous experiment conducted by Elton Mayo and Fritz J. Roethlisberger at the Western Electric Co. in Hawthorne, NJ, from 1927-1932 called the Hawthorne Experiment accidentally revealed a method of preventing alienation. Mayo and Roethlisberger were studying what balance of physical conditions, labor, and coffee breaks would maximize productivity. However, regardless of the ways they changed the physical conditions, the productivity rose. Upon investigating by interviewing the workers, they were told by the workers that they were flattered that anyone would take notice of them and wish to do an experiment that would benefit them, so they felt as if they should work their best (267). Thus, they disco How to cite Computer Development from 1970-1990, Essay examples

Pride And Prejudice By Austen Essays - Humour, Pride And Prejudice

Pride And Prejudice By Austen Pride and Prejudice is one of the most popular novels written by Jane Austen. This romantic novel, the story of which revolves around relationships and the difficulties of being in love, was not much of a success in Austen's own time. However, it has grown in its importance to literary critics and readerships over the last hundred years. There are many facets to the story that make reading it not only amusing but also highly interesting. The reader can learn much about the upper-class society of this age, and also gets an insight to the author's opinion about this society. Austen presents the high-society of her time from an observational point of view, ironically describing human behavior. She describes what she sees and adds her own comments to it in a very light and easy way. She never seems to be condescending or snubbing in her criticism but applies it in a playful manner. This playfulness, and her witty, ironic comments on society are probably the main reasons that make this novel still so enjoyable for readers today. Some rules and characteristics depicted in the story seem very peculiar and are hard to conceive by people of our generation. Nevertheless, the descriptions of the goings-on in that society are so lively and sparkling with irony that most people cannot help but like the novel. Jane Austen applies irony on different levels in her novel Pride and Prejudice. She uses various means of making her opinion on 18th century society known to the reader through her vivid and ironic descriptions used in the book. To bring this paper into focus, I will discuss two separate means of applying irony, as pertaining to a select few of the book's characters. The novel is introduced by an omniscient narrator, unknown to the reader, who describes and comments on the given situations throughout the novel. The narrator serves to represent and speak for Jane Austen, enabling her to aim her criticism not only through the characters, but also in a more direct fashion. She uses this unspecified person, who is outside of all the novel's action and gives explanations, as a medium of communication to present her own opinion in an allusively open way. This narrator is the first means of making ironic remarks. Through the narrator a certain mood is created that prevails throughout the novel. The very first sentence of the novel shows this with the following sentence, "It is a truth universally acknowledged, that a single man in possession of a good fortune must be in want of a wife" (Pride and Prejudice, p. 3). The irony of this statement is the universal validity with which assumptions are made in that upper-class society. It is assumed that there is nothing else for a man of high rank to want but a wife to complete his possessions. Along with his money, land, riches etc. she acts as nothing more but another piece of property, which was a common attitude in those days. Austen manages to make the attitude towards matrimony upheld by this upper class look rather ridiculous and incredible. Another ironic description is given, for instance, when Miss Bingley and Mrs. Hurst take care of the sick Jane, who stays at their house. They present themselves as very affectionate and caring friends to Jane. However, that does not stop them from talking very bad about Jane's relations. The real ironic comment is that the narrator lets us readers know that after those two ladies have finished bad mouthing Jane's sister Elizabeth and the rest of her family, they return to Jane "(w)ith a renewal of tenderness" (p. 27). These high-society women are well versed at putting others down and whimsically, and as they think wittily, insulting the characters of those who are of a "lower class" - and Austen comments on it ironically by describing their behavior with irony. Through the narrator, Austen shows us how fickle this society is; being based on class and rank. The narrator exposes the vanities and its stupidity rather drastically. The comment on Aunt Phillips who "would hardly have resented a comparison with the housekeeper's room" (p. 56) of Rosing's with her own living-room is so ironically bitter that it even borders on being mean. These are only a few examples to show how the general ironic mood of the novel is created. The second means of creating irony in the novel is through the particular use of the characters involved. Elizabeth Bennet is the main character of

Windows NT essays

Windows NT essays Windows NT is a multitasking, 32 bit operating system. It was invented to make todays processes run more efficiently. More than one version has been brought into the industry to work well with the changing technology of computers. The two versions are known as Windows NT Workstation and Windows NT Server. The Windows NT Server is designed to be used on a computer that is specifically made to withhold information and to be used as a central office. This means that all commands will go through this one computer. Windows NT workstation is designed to be used on a computer that is connected to the server. It has only the necessary applications installed on it and uses the server to save files, and to access files. Both operating systems use the same kernel and operating system code and can act as an application server on NetWare and Microsoft (page 717). Microsoft started in the mid- 1980s when it was in cooperation with IBM. They created the OS/2 operating system, which was written in assembly language for a single processor 80286 system. Microsoft decided it wanted to fly away from the nest by developing new technology (NT). NT was originally supposed to be was supposed to use OS/2 as a native environment however it managed to become a 32 bit Windows architecture. Features play an enormous part in an operating system. There are specific features that will make an operating system unique and will be beneficial towards ones usage. A few features, which are a necessity in any growing business, are extensibility, reliability, and performance (pp 717-718). Extensibility gives you the ability to make expansions on your operating system so that it can grow with technology. NT is a layered architecture, which allows you to change certain features of the O/S without changing the basic code. NT executive runs on a kernel and provides the basic system services. This is a simple example of ...

Top 12 High Paying Part-Time Jobs With Good Work-Life Balance

Top 12 High Paying Part-Time Jobs With Good Work-Life Balance Need some extra income? Or just need a job, period, and prefer to work part time? Keep in mind that not all part-time jobs are created equal. Some people find themselves earning next to nothing, while others find themselves in pretty lucrative high paying part-time jobs. Find one that pays well and gives you the flexibility and compensation you need. Make sure to match a job to your particular skill set and expertise- not to mention your interests! Here are 12 of the high paying part time jobs  out there, across a range of skills and fields.1. Child CareFrom casual babysitting for cash on the side to tutoring (independently or through a service) and working in a classroom or after-school program, there are always jobs taking care of children. You could even consider a job as a camp counselor.2. Senior CareDitto for senior citizens. If you enjoy working with the elderly, you could work in a senior center, a care facility, retirement home, or even doing in-home medical care. You coul d also work in transportation assistance.3. Health CareThere are always job openings out there in the health profession. Work in doctors’ offices, hospitals, patients’ homes. Be a nurse, technician, equipment salesperson, pharmaceutical sales rep†¦ the list goes on and on. The possibilities are endless.4. Computer Support/Web DesignPeople always need tech support or design help. These jobs are particularly good for part-time work. If you’re really good with computers and/or design, you can make quite a bit of money in this field, even on the side.5. Consultant/FreelancerDepending on your particular expertise and the field you’d want to work in, this is always a good part-time option. It’s particularly easy to get this kind of work if you’re a lawyer, medical professional, writer, or teacher. But the case can be made in nearly any field. You can customize this work around your particular strengths and schedule.6. Online TeachingWith more and more classes being taught online, this is a great opportunity to get a part-time job and teach- from home. You could arrange this through a college or university, if qualified, or start your own continuing education class in your city or town.7. Pet CareIf you love pets, consider dog walking, pet sitting, even pet grooming. Or look for part-time admin work at your local vet office. It never hurts to sweeten your pitch by getting a bit of training in animal behavior or pet first aid as well. Bonus: if you do so, you can probably raise your rates!8. House SittingWork from home from someone else’s house! Stay in different places around your area (or the world) and make a bit of money whenever someone needs to leave town for a short (or long) trip.9. CateringIf you can work evenings and/or weekends, catering serving can be a great gig. It’s often taxing, very physical work, but you usually get a good hourly rate and the gigs are plentiful.10. Personal AssistingBe some one’s personal assistant, either locally or virtually. Check sites like Care.com for potential jobs. Run errands, tidy offices, etc.11. FitnessIf you have qualifications in yoga or personal training, you can make great money doing private sessions on the side. You’ll need first aid and CPR certification, but if you can build a solid client base, you’ll be looking at some great steady income.12. Call CentersEspecially if you’re willing to work overnight shifts, evenings, and weekends, when most call center employees would rather not schedule their shifts, you can get hired to offer customer support, account management, or telemarketing. Usually only requires a high school diploma.Bottom line: pick something you’d be good at, that complements your skills and experience, and that fits with your schedule needs, and you can’t go wrong.

Recommendation report in which you compare two potential river or sea Assignment

Recommendation report in which you compare two potential river or sea developments for one city with the intention of attracting - Assignment Example However, there are hundreds of rivers that cut across the Rio de Janeiro state, most of them having cities, towns and settlements developed along their banks. Therefore, natural resources, and most especially rivers, are vital components of the economy and the life of Rio de Janeiro (Canadian Tourism Commission, 2013 p12). Among the popular rivers that cut right across the city of Rio de Janeiro are the Acari River and River Paraiba do Sul, which constitute vital resources for the city (De Vries & Reilly, 2011 p21). However, the potential of these two rivers is yet to be completely tapped, and especially in regards to water-based tourism, which is evidently possible and attractive in these rivers. Thus, any development and rehabilitation of the two rivers that is targeted towards this objective is sure to deliver positive results, a major reason that informs the recommendation for the development of the two rivers for this purpose. The Acari River flows in the South eastern side of B razil, through the Rio de Janeiro state, forming one of the major water-courses that supply the city of Rio de Janeiro (Room, 1997 p311). The river cuts across the city of Rio de Janeiro from the western side, and it separates this city from the city of Duque de Caxias (Room, 1997 p303). The most significant aspect about the strategic positioning of this River is that; it separates the most populous City in the Rio de Janeiro Metropolitan Area, which is the City of Rio de Janeiro, from the third most populous city in the region, which is the city of Duque de Caxias (Ades, 2004 p322). This fact is especially significant, considering the number of people who can be able to access and subscribe to the tourist activities established in this river, should the river be rehabilitated and developed for water-based tourism, are high. The other fundamental characteristic of the Acari River, which makes it most suitable for development for the purposes of water-based tourism, is the fact that the Acari River is navigable (De Vries & Reilly, 2011 p32). The river traverses across regions that are well endowed for boat and canoe riding, thus making it a suitable river for developing towards these purposes. Additionally, the Acari River is not silted up; therefore it presents no danger of derailing the riding of canoes and boats used for water-based tourism explorations (Krystek, 2012 n.p.). The Acari River has a very large flow of water, meaning that it is a river that can be rehabilitated for the purpose of water-based tourism, since it can manage to sustain and supply the flow of water required for this purpose throughout all seasons. The vegetation along the regions of interface between the river and the land surface also suffices the need for soil conservation purposes, by ensuring that no soil from the land masses can directly cause the siltation of the river, while also preventing soil erosion, because it enhances the filtration process (Ades, 2004 p319). The river al so possess several species of fish, especially on the upper side that is before the section where the Acari River joins the cities, making it even more viable for

Recruitment and retention for qualified staff Essay

Recruitment and retention for qualified staff - Essay Example Moreover, the power of switch over or turnover of the employees might get reduced thereby amplifying the process of retention. Hence, it might be stated that, effective management and control of the human resource is directly responsible for their retention and improvement. This might prove effective in enhancing the level of functioning and competitive leverage of the organization among other new entrants. Literature review According to Sass (2012), human resource acts as the main pillar of an organization. Without which, an organization may not function effectively for longer period of time. As a result, the dominance and effectiveness of the organization might get fader slowly and gradually in all aspects as compared to other rivals operating in the similar segment. Therefore, in order to retain such essential resources, human resource management is extremely essential. Human resource management is the process used in recruiting and presenting training programs to the employees wi thin an organization. Due to which, an employee might become more valuable and worthy for the organization in this age. However, to increase the effectiveness of the employees, they need to be offered with accurate type of job orientation and scheduling programs that might enhance the skills and talents of the employee as well as the total productivity of the organization. As a result, the level of dedication and performance of employees towards job responsibilities of them might get enhanced. It is extremely essential for an employee to enhance his wage rate as well as retention power among other fresh and talented individual of this recent age (White & Drucker, 2013, p. 345-378). Other than this, management of the organization also might try to recruit the exact person for the exact job, so as to enhance the level of efficiency and devotion of the employee. Side by side, it might also help in enhancement of the total productivity and profit margin of the organization in the market among others. Hence it might be depicted clearly that experienced and talented employees are the most valuable assets of an organization, without which it may not prosper in the market (Price, 2011, p. 345-489). According to Price (2011), human resource management comprises of recruitment, development and retention of the experienced and talented employees so as to accomplish the strategic goals and objectives. However, it might be possible only if the employees are presented with varied types of benefits and incentives as per their level of performances. This strategy might prove effective for the employees in enhancing its level of motivation and loyalty towards responsibilities and tasks. Due to which, the level of performance of the employees might get enhanced thereby improving its dominance among other junior employees of the organization. It might also prove helpful for the employee in creating a substantial position (just as a leader) in the organization among others. As a result, these employees (leaders) might help in resolving varied types of disputes thereby implementing uniformity and consistency within the organization. Thus, the level of retention of the experienced employees might get increased thereby reducing the level of attrition (Barrett & Mayson, 2008, p. 346-456). Therefore, retention or recruitment of the experienced employees might help in enhancing the level of productivity and total sale of the

How to buy a car stereo :: essays research papers

  Ã‚  Ã‚  Ã‚  Ã‚  Nearly everyone who has sat in traffic has noticed the mind numbing amounts of bass produced by some car stereos. What most drivers aren’t aware of is how to buy a system of sub-woofers for their own car. The most noticeable feature of these systems is their price which is limited only by human imagination. The most basic understanding of how much these systems cost, although varied by complexity and brand name, lies within the power of the components that comprise them.   Ã‚  Ã‚  Ã‚  Ã‚  The power of a system is measured in watts. The more powerful the system, the more watts of electricity it is capable of receiving and transforming into auditory noise. Speakers designed for bass, or [sub-]woofers, range in power levels from 50 watts which can hit 65 to 70 decibels, approximately as loud as traffic on a busy street. These smaller woofers, generally the 10 inch or 12 inch variety, usually cost between $30 to $100 each. The largest woofers can handle several thousand watts reaching over 150 decibels loud, as loud as a rocket engine. Powerhouse woofers which usually come in sizes of 12 inches, 13 inches, 15 inches, or larger, can cost from $80 to $1200 each. Some audio enthusiasts will choose to only install one woofer, although many choose to install more. Woofers are a great place to start planning a mobile entertainment system, however the most important part for audio enthusiasts will be what powers them.   Ã‚  Ã‚  Ã‚  Ã‚  The greatest cost in the stereo system will come from the amplifier or amplifiers depending on the size of the stereo. The tonal quality, or the accuracy of the signal-to-noise ratio for each particular speaker is primarily affected by these high tech electronics which in turn, affects the price. A a low wattage amplifier that lacks tonal quality can be purchased for as low as $150 each. High power amplifiers with the purest tonal quality would start at $450 and go up from there. How many amplifiers will be needed to properly power the woofers depends entirely upon how many woofers are chosen to be installed into the mobile entertainment system.   Ã‚  Ã‚  Ã‚  Ã‚  The final ingredient in completing a car stereo is to pick which type of enclosure to install the woofers in. These boxes are made of wood and are carpeted, generally costing around $150 to $250 for the basic setup. There are no major differences in cost, yet there are three major types of enclosures to choose from.

Travel and Tourism Field : Bangkok Field Trip

Introduction Tourism is clearly understood as an eminent cause of umpteen changes involving various aspects, consisting of the destination's economy, politics and culture (Cohen, 2001; Crick, 1994). With these radical changes, local's hold different attitude towards tourism development and tourists themselves, both positively and negatively. Tourists behavioral, as one aspect leading to the influential of local's attitude towards tourism, were bought upon by their motivation to travel as well as their origin country and culture.MacCannell (1989) suggests that tourism is a social phenomenon that can be viewed as a stage where human interactions transpire. As for this case study, preeminent focus will be on what motivate tourists to travel, their behavior and interaction towards the locals, as well as how locals response to these behaviors of the tourists and their perception towards them. This study was limited in one specific tourism attraction in Bangkok. Tourism industry is a major economic factor in Thailand.With new shopping malls and hotels built in Bangkok over recent years, international visitors grew over 14 million vacationing in Thailand, ranking 18th most visited country in the world (Tourism Authority of Thailand, 2010). Brief interviews and observation will be focus onto the locals and tourists regard their behavior and interaction in Bangkok. Case study in Bangkok A different sense of space induced upon arrival at the airport, with heightened attention on the objectives of the study trip, eyes were wide open and attempting to spot on materials relevant for the research.During the trip, most of the traveling was done via walking and communication barrier was an obstacle to be tackled during interaction with the locals. In attempt to accomplish the study trip theme, three interviews were conducted with other tourists and eight conducted with the locals, those of known common languages. Interesting responses were given from the locals with different job roles. Culture shock arise while observing their socio cultural environment, specifically on the public response towards the young boy with both arm amputated under the blazing sun begging for money and how locals could dine under severe unhygienic conditions.Observation and experimental test proven local's attitude towards tourists can easily be manipulated with tipping and money. Many tourists with similarity nationality were spotted in the street of Phetchaburi shopping malls and streets. In aspect of tourism glaze, it was dishearten to watch other tourists with the same nationality to behavior in an unethical manner. Events as such were several wastage of food by the tourists due to the cheap pricing or fondness to try out Thai Cuisines rather than filling up and absurd bargaining by tourists in shopping malls. Literature reviewResearches and theories of others were studied to apprehend tourism motivation of traveling. Personality and motivation are interrelated, where perso nality could be divided into psychocentric, as non-adventuresome, and allocentric groups, as adventuresome (Plog, 1974). Dann (1977) and Crompton (1979) both emphasize the importance of â€Å"Push† and â€Å"Pull† factors shaping tourist motivations. Iso-Ahola (1982) suggests tourism motivation consist of extrinsic component, desire to escape the everyday environment, and intrinsic component, desire to acquire psychological rewards through travel in a different environment.Kozak's (2002) study examines the differences in tourist motivation between nationalities, as well as the destinations. His study discovered four dimensions of travel motivations includes cultural, pleasure or fantasy based, relaxation based and physical motives. Ambro (2005) suggests that when tourists interact in a certain destination for a long duration of time, a kind of place dependency will be developed and may even become part of their identity which develop their avidity to visit the place ag ain With aspect to tourism behavior, Ritter (1987) suggests that different tourist behavior is influenced by different nationality.However, Dann (1993) criticized the use of nationality as a sole discriminating variable for illustrating the dissimilarity found in the tourist's behavior. Additional variable such as age and gender differences plays a part on different motives and behaviors. Older tourists tend to travel based on relaxation and cultural exploration, whereas younger tourists tend to seek for physical activities and engage in sports when visiting a destination (Cristina. t al, 2008). Conversely Andreu et al (2005) identified that age of a tourist holds no significant influence on travel motivations. As for the gender differences regards to traveling, Andreu et al (2005) suggest that female tourist preferred a stronger escape based and relaxation motives while male tourist preferred more recreation and activity. Following reviews will be the fundamental studies on the loc al's perception toward tourism.Mass tourism generates dramatic changes in both physical and cultural environment, impacting on the values and traditional way of life in the local community. These changes force local to be actively involved in the tourism industry of the destination (Getz 1994). Ap et al (1998) claimed that a well-establish relationship between the locals and tourists was prerequisite for a tourist destination to achieve long – term development, yet the attitudes of the local hold highly irregular meanings towards the growth of the destination (Relph, 1976).Milman et al (1988) studied the positive attitudes towards tourists, with employment opportunities, income from taxes and increased quality of life as a positive impact of tourism. Mansfeld (1992) focused the perceptions of the local and examined the negative impacts of tourism. He suggested that locals with higher incomes from tourism hold more positive attitudes towards tourism. Furthermore, Duvall (2002) pinpointed the negative impacts of tourism, which were the high taxes and prices in the destination, no vacation for the locals and long working hours to earn money.Additionally, Jafari (2001) discovered six platforms of tourism, two platforms namely the â€Å"Advocacy† and â€Å"Cautionary† platforms emphasized the positive and negative impacts of tourism, which was supported by the previous studies. Liu et al (1987) analyzed local's perceptions of the negative impacts of tourism as a function dependent on the ratio between the number of tourists and locals. He claims that with higher ratio of tourists per locals will eventually lead to stronger criticism of tourism and a subsequent increase in opposition to tourism development.Contradicting to his analysis, Angel et al (2007) evaluated that the higher density of tourism in a destination, the more favorable people are to tourism development and less worried about the negative impact. Results and Analysis With limitat ions and insufficiency of time, three interviews were conducted with other tourist within the street of Phetchaburi, mainly Singaporean and Australian aging from 21 to 33. The general question posted to them was â€Å"What made you choose to travel to this place? The results from these candidates hold different opinions according to their nationality. From the two interviews conducted, both with the same nationality as Singaporean, a couple aging 24 and 25, and a group of three youngsters aging 22 to 25 respectively, similar results shown that their motives to travel was to escape from everyday routine life, to relax and most importantly, shopping. The first interview conducted with the couple also stated that it was their fourth time traveling to Bangkok because they love the place.These groups were classified as psychocentric (Plog, 1974), and were motivated as â€Å"Push† factors in relevance from Dann (1977) and Crompton (1979) studies. Motivated from the extrinsic compo nent (Iso-Ahola, 1982), they seek to escape from everyday life and decided to travel to Bangkok as an option. As for the first interview candidates, the results demonstrated Ambro (2005) study whereas they had treated Bangkok as their â€Å"second home†. On the contrary, results taken from the Australian couple hold different perceptive compared to the first two results.The Australian couple aging 31 and 33, both carrying bulky haversack, mentioned that they were on an adventure to sight Bangkok Grand Palace and Temples. Phetchaburi only served a pit-stop for them and had no interests in shopping, their desire to see and obtain new knowledge from different countries culture and history. In accordant with the motivation concepts, this Australian couple was classified as allocentrics (Plog, 1974), and were motivated as â€Å"Pull† factors in relevance from Dann (1977) and Crompton (1979) studies.Contrasting from the first and second candidates, they were motivated from t he intrinsic component (Iso-Ahola, 1982), seeking for new knowledge and experience from traveling where they were unable to achieve back in their country. In respect to the interviews conducted with other tourists, the two different nationalities, Singaporean and Australian, supported Kozak (2002) and Ritter (1987) studies as different nationality reflected different motives and behavior in tourism.Due to the small group sample in this study case, it was prejudiced to confirm the argument between Cristina et al (2008) and Andreu et al (2005), however observations during the trip were partially agreeable with Dann (1993), age and gender plays a role in different motives and behaviors beside nationality. Such observations were spotted in Platinum Mall, where most shoppers were young tourists, mostly females, bargaining on items in shops vendor. From the results of the eight interviews conducted by the locals, six expressed positively while two explained why tourism affected negatively towards the community.Corresponding to (Relph, 1976), these result signifies that not all locals hold the same perception and attitude towards tourism. Questions such as â€Å"What do you think tourism is Bangkok, Why† were posted to the candidates and results were recorded as follows. These six locals who expressed positively towards tourism stated tourism allowed them to make a living and increased their quality of life (Jafari, 2001; Milman et al, 1988). Out of these six locals, one which was the owners of traditional Thai massage centre indicated that locals with higher incomes from tourism hold more positive attitudes towards tourism (Mansfeld, 1992).Two locals, mainly the therapist and the shop vendor expressed negatively. According to the therapist, she stated that their pay was very little with long working hours during peak seasons, very tiring and limited job option as most job availability in the destination caters to the tourists industry (Duvall, 2002). As for t he shop vendor, she mentioned tourists bargaining of goods and items created a negative impact towards the businesses in the shopping mall, and would rather to locals as their customer because they do not bargain as much (Jafari, 2001).From the interview with the Restaurant Waiter, the results reflected relevance findings with Angel et al (2007), explained that it's a everyday norm to see tourists waste their food hence would not mind them doing so. In comparison with 3 of the interviews, conducted by the Shop Vendor, Manicure Practitioner and â€Å"Tuk Tuk† Rider, interesting results collected which demonstrated the inconsistency of local's perception towards tourism (Relph, 1976). Both Manicure Practitioner and â€Å"Tuk Tuk† Rider preferred tourist customer as they could earn more from them.Notwithstanding in the Shop Vendor's view as she preferred local customers. No such findings corresponds to Liu et al. (1987) study which local's perceptions of the negative impa cts of tourism as a function dependent on the ratio between the number of tourists and locals Studying both results from other tourists and the locals, as well with observation throughout the trip, various connections were discovered between the tourist and the locals in this case study.Starting off, evidences had pointed out different nationality plays a crucial role onto individual's motive in traveling, leading to various behaviors. Local's perceptions towards tourism vary with the tourist's behavior, which in-turn not only generates â€Å"nationality stereotyping†, but also â€Å"acceptance† towards their behavior. One distinct reason of such â€Å"acceptance† was tourism money.With this â€Å"acceptance† developed with the locals, enhanced service satisfaction was provided towards tourists rather than towards the locals themselves, which resulted high satisfaction level from tourist and eventuate high expenditure of them. There forth some locals atte mpted to take advantage whereas they tried to hike up prices of services and goods, holding the belief that most tourists would not be mindful of expenditure cost. Frustration occurred for every failed attempt, such examples could be observed from the Shop Vendor and the Taxi Driver.Possibility of such failure roots back to the tourist's nationality. This relationship not only associates the interactions between tourists and the locals, however evolved through the acceptance of tourist's behaviors and the level of local's intention to earn tourism money. Model 1: Overview of the relationship between the Tourists and Locals Model 2: Acceptance and Service level interrelation with Expectancy on earning from tourists Model 1 shows the overview of the relationships between tourists and locals found in this case study as mentioned previously.Model 2 displays a simplified graph, due to the lack of quantitative data collected indicate the higher level of acceptance and service level, the h igher expectancy and intention to earn tourism money. Conclusion The theoretical concepts extracted from literature reviews constitute discussion pointers on tourism motivation and behavior, as well as local perception and attitude towards tourism. In conclusion of this study case, the results highlighted the dependence of tourism's motivation and behavior on nationality.Thus, the results also evidence inconsistency of local's perception towards tourism. Evaluation of the analysis suggested a relationship between the tourist and the locals from the case study. The relationship indicates the acceptance of tourist's behavior as an influential component with the level of quality services provided, hence leading to the intention and expectancy on tourism money. The findings of this study display significant meanings and explanation on the inconsistency of local's perception towards tourism as well as their behavior towards ourism. Due to the location and sample quantity limitations from the study case, questions such as â€Å"does gender contribute to different tourism motivation and behavior† and â€Å"diversification of the relationship suggested from this case study between the tourists and locals in different destination† were yet to be answered. (2213 words) References Andreu, L. , Kozac, M. , Avci, N. , Cifter, N. (2005). Market segmentation by motivations to travel: British tourists visiting Turkey. Journal of Travel and Tourism Marketing, 19(1), 1-14. Ambroz, M. (2005).Sociology of Tourism: The basis for the investigation of travelling cultures. Portoroz: Turistica. Angel, B. B. , Jaume, R. N. (2007). Attitudes towards tourism and tourism congestion. JEL Classification, L83, 194-206. Ap, J. & Crompton, J. L. (1998). Developing and Testing a Tourism Impact Scale. Journal of Travel Research, 37, 120-130. Cohen, N. , eds. (2001). Ethnic Tourism in Southeast Asia. Bangkok, Thailand: White Lotus Press. Crick, M. (1994). Resplendent Sites, Discorda nt Voices. Sri Lankans and International Tourism. Switzerland: Harwood Academic Publishers. Cristina, J. , Dwayne, D. 2008). Does nationality, gender and age affect travel motivation? A case of visitors to the Caribbean Island of Barbarbos. Journal of Travel and Tourism Marketing, 25(3–4), 398-408. Crompton, J. L. (1979). Motivations for pleasure vacation. Annals of Tourism Research, 6 (1), 408-424. Dann, G. (1977). Anomie, ego-enhancement and tourism. Annals of Tourism Research, 4(4), 184-194. Dann, G. (1993). Limitation in the use of nationality and country of residence variables. In D. Pearce & R. Butler (Eds. ), Tourism research: Critiques and challenges (pp. 88-112). London: Routledge. Duvall, T. (2002).Tourists and locals: the people of Mazatlan, Mexico have many reasons for welcoming visitors. Retrieved from http://www. academia. edu/711646/Analogous_Inequalities_Sources_of_Conversational_Hierarchy_in_Mazatlan_Mexico Getz, D. , 1994, Residents' Attitudes toward Tourism : A Longitudinal Study in Spey Valley, Scotland, Tourism Management, 15(4), 247-258. Iso-Ahola, S. E. (1982). Toward a social psychological theory of tourism motivation: A rejoinder. Annals of Tourism Research, 9(2), 256-262. Jafari, J. (2001). In Hosts and Guests Re-visited. Smith, V. L. and Brent, M. (Eds. ) Cognizant Communication Corporation. New York.